Select your Region
Philmac Micro Irrigation Valves
Philmac’s range of barbed and threaded quick action valves suit both LD pipe and drip tape.
LDPE QUICK ACTION VALVE (Barb)
| Product Number | Size | |
|---|---|---|
| VQA38 | 10 mm x 10 mm | |
| VQA12 | 13 mm x 13 mm | |
| VQA58 | 16 mm x 16 mm | |
| VQA34 | 19 mm x 19 mm | |
| VQA10 | 25 mm x 25 mm | |
| Philmac recommend the use of Ratchet Clips with valves | ||
LDPE QUICK ACTION VALVE (Barb)(Male)
| Product Number | Size | |
|---|---|---|
| VT1212 | 13mm barb x 1/2” BSP male | |
| VT1234 | 13mm barb x 3/4” BSP male | |
| Philmac recommend the use of Ratchet Clips with valves | ||
MICRO FLOW CONTROL VALVE
| Product Number | Size |
|---|---|
| V4T | 4 mm Threaded |
TAPE-LOCK LAYFLAT CONNECTOR
| Product Number | Size |
|---|---|
| LF1625 | 2 5mm tear drop |
| x drip tape 5/8” (16 mm |
TAPE-LOCK TAKE OFFS – TO SUIT TOP HAT GROMMETS
| Product Number | Size | |
|---|---|---|
| TLTO13 | 13 mm (GR12TH) | |
| x drip tape 5/8” (16 mm) | ||
| TLTO16 | 16 mm (GR58TH) | |
| x drip tape 5/8” (16 mm) |
TAPE-LOCK TAKE OFFS – TO SUIT LD PIPE
| Product Number | Size |
|---|---|
| TLTO13 | 13 mm pipe |
| x drip tape 5/8” (16 mm) | |
| TLTO16 | 16 mm pipe |
| x drip tape 5/8” (16 mm) |
TAPE-LOCK CONNECTOR
| Product Number | Size |
|---|---|
| TLT13 | 5/8” (16 mm) x 13mm branch |
| TLT16 | 5/8” (16 mm) x 16mm branch |
TAPE-LOCK TEES
| Product Number | Size |
|---|---|
| TLT13 | 5/8” (16 mm) x 13mm branch |
| TLT16 | 5/8” (16 mm) x 16mm branch |
TAPE-LOCK QUICK ACTION VALVE
| Product Number | Size |
|---|---|
| TLV13 | 13 mm x 5/8” (16 mm) |
TAPE-LOCK FLUSHING VALVE
| Product Number | Size |
|---|---|
| TLVF5 | Red cap – Seals at 5 kPa |
| TLVF12 | Black cap – Seals at 12 kPa |
Overview / Why Choose This Product
Philmac Micro Irrigation Valves are designed for low-flow systems where precise water control is essential. Built from UV-stabilised polypropylene, these valves resist corrosion and withstand harsh outdoor conditions. Easy to install with barbed or threaded ends, they provide a simple, reliable solution for horticulture, landscaping, and garden irrigation.
Key Features
Precise flow control – ideal for drip and micro-spray systems
UV-stabilised polypropylene – engineered for outdoor use
Compact design – fits tight spaces in irrigation layouts
Easy installation – barbed or threaded ends for quick connection
Applications & Benefits
Applications
- Drip irrigation lines
- Micro-spray systems
- Garden beds and pots
- Horticultural irrigation setups
Benefits
- Efficient water use – reduces waste and improves plant health
- Quick installation – saves time during setup
- Long service life – withstands UV exposure and corrosion
Technical Specifications
- Size Range: 4 mm, 6 mm, and 13 mm
- Connection Type: Barbed or threaded ends
- Material: UV-stabilised polypropylene
Note: Always confirm size and compatibility against the official datasheet and local standards.
Installation Guide
- Select correct valve size for your micro irrigation line.
- Cut tubing square and ensure ends are clean.
- Insert barbed end fully into tubing for a secure fit.
- For threaded connections: Apply PTFE tape and screw into fitting.
- Pressurise and test the system for leaks and correct operation.
For detailed diagrams and adjustment tips, view the Philmac installation guide online.
FAQs
What are micro irrigation valves used for?
To control water flow in drip and micro-spray irrigation systems.
What sizes are available?
Common sizes include 4 mm, 6 mm, and 13 mm.
Do I need special tools for installation?
No. Installation is simple with standard irrigation tools.
What makes Philmac valves different?
UV-stabilised materials, easy-fit design, and Australian Made quality for long-term reliability.
